Ruckus Wireless ICX 7150-24, Hardware Installation Manual

Page: 25 / 123

TABLE 11 Installation and basic system configuration
Task Task details or additional information Completed
Mount the device. Choose one of the following mounting options:
• Mount the device on a desktop or flat surface. Refer to Mounting on a desktop or
flat surface on page 28.
• Mount the compact device with a magnet. Refer to Mounting the compact
device with a magnet on page 30.
• Mount the compact device under a fixed surface or desk. Refer to Mounting the
compact device under a fixed surface on page 36.
• Mount the compact device directly on a wall. Refer to Mounting the compact
device directly on a wall on page 39
• Mount the device on a wall using the wall mount brackets. Refer to Mounting on
a wall using the wall mount brackets on page 43.
• Mount the device on a two-post rack. Refer to Mounting on a two-post rack on
page 48.
• Mount the device on a universal four-post rack. Refer to Installing the 1U, 1.5U,
and 2U Universal Kit for Four Post Racks (XBR-R000295) on page 53.
Gather all components required for the initial
setup. Refer to Items required on page 75.
Provide power to the device. Refer to Providing power to the device on page 75.
Attach a management station, establish a
console connection, and configure the
various levels of passwords. Refer to Establishing a first-time connection to the console port on page 76. After
completing this task, log in to the console port to configure the device.
Set the IP address, subnet mask, and the
default gateway IP address. Use the
ip address
command to configure a static device IP address, subnet mask, and
gateway IP address, or you can use a DHCP server to obtain the information dynamically.
Refer to
Configuring an IP address for the device on page 79.
Set the date and time
• Use the clock set command to set the current date and time for the device.
Refer to Setting the date and time on page 80 for more information.
Customize the host name and chassis
name.
• Use the hostname command to change the default host name and CLI prompt.
• Use the chassisname command to change the default chassis name or ID.
Refer to Customizing the host name and chassis name on page 79 for more information.
Establish a connection to the out-of-band
management port. By establishing a connection to the out-of-band management port, you can complete the
device configuration using an SSH session, Telnet, or management application, such as
Brocade Network Advisor. Refer to
Establishing a connection to the out-of-band
management port on page 80.
Verify that the device operates correctly.
• Check the LEDs to verify operation of functional parts. Refer to Verifying the
correct operation on page 81.
• The following commands can be useful to establish an operational baseline for
the device. Refer to the
Ruckus FastIron Command Reference guide for more
information on these commands:
–
show chassis
– show version
– show cpu
– show flash
– show files
– show run
– show boot-preference
– show configuration
– show running-config
– show logging
Back up the configuration. Use the write memory command to replace the startup configuration with the running
configuration. Refer to Backing up the running configuration on page 81 for more
information.
Preparing for the Installation
Quick installation checklist
Ruckus ICX 7150 Switch Hardware Installation Guide
Part Number: 53-1004928-05 25