RuarkAudio R1 mk4, User Manual

Page: 16 / 203

EN
DA
DE
ES
FR
IT
JA
KO
NL
NO
PL
RU
ZH
FM radio
The first time you use FM on your R1, or if the FM
station list is empty, it will automatically perform a
station scan to create a list of available stations.
Change station
Press or to show the station list. Pressing it
again shows the next or previous station, to tune to a
station, select it by pressing the CONTROL KNOB , or
wait a few seconds for it to automatically select.
Once the station list is displayed, you can also scroll
through the list by rotating the CONTROL KNOB and
selecting a station by pressing the knob.
You can also show the station list by selecting
MENU > Station list .
To seek the next or previous station, press and hold
or .
The station frequency is normally replaced by the
station name a few seconds after tuning into an FM
station.
FM radio text (RDS/RBDS)
MENU > Info
Select what programme information is shown.
Manual tune
MENU > Manual tune
Select manual tune, rotate the CONTROL KNOB to
change the frequency and then press it to select that
station.
Save preset
You can store 8 FM stations in your preset list. If RDS
data is not available, your R1 will store the frequency
instead of the station name in the preset list.
Recall preset
See ‘Common functions’ section.
Station scan
MENU > Station scan
We recommend you periodically update the station
list with a station scan. If the station list is empty the
radio will automatically perform a station scan as
soon as you switch to FM.
Sensitivity
MENU > Sensitivity > Strong stations or All stations
Change the FM sensitivity to either tune into all
stations or only strong stations with good reception.