RTW DigitalMonitor 10500X-PLUS, Operating Manual

Page: 155 / 251

RTW DigitalMonitor 10500X-PLUS 155
The captions for the key functions in menu mode are now listed and de-
scribed top down (also see Fig. E 3-2, E 3-3 and E 3-4):
• Quit key
This key is available on all menu pages. It is used to leave the menu and
return you to normal display mode. If you have entered one of the options
on the main menu before (regardless of whether you have actually changed
any parameters or not), you will be asked to save the current configuration
in one of the user presets by pressing the red
Sel (SELECT) key. If you
decide to discard any changes, you can leave the menu by pressing the
Quit key again. The unit will then return to normal display operation without
storing.
• Esc(ape) key
This key is available on all menu pages except the main menu level. Using
this key you can leave the current menu page and return to the previous
page.
• Rgt (Right) key
This key is only available on the Routing, Label, Color and Save Preset
menu pages. Using this key moves the cursor one step to the right. The
position of the cursor is marked with [ ].
• Up key
This key is available on all setup menu pages. Using this key moves the
red marked cursor one step up to the next upper menu item. When the
cursor gets the item on the top and you press the
Up key again the cursor
jumps to the item at the bottom of this menu page.
• Dwn (Down) key
This key is available on all setup menu pages. Using this key moves the
red marked cursor one step down to the next menu item below. When
the cursor gets the item on the bottom and you press the
Dwn key again
the cursor jumps to the item at the top of this menu page.
• Sel(ect) key
This key is available on all setup menu pages. Using this key all accessed
items can be entered.
E 3 Quick Start • E 3.3 Menu Access
See Fig. E 3-2, E 3-3
and E 3-4