RTW DigitalMonitor 10500X-PLUS, Operating Manual

Page: 189 / 251

RTW DigitalMonitor 10500X-PLUS 189
E 4.9.1 Changing Numeric parameters
It is possible to customize some of the parameters shown in the Numeric
display.
To access the respective menu from normal display operation please
proceed as following:
1. Press and hold the currently marked MODE/SET button until the unit
changes to main menu mode.
2. Use Up or Dwn key to set the red cursor on the Modify Preset option and
enter this selection by pressing the Sel (SELECT) key.
3. Use Up or Dwn key to highlight the Primary Function option for Multi In-
strument 2. Press the Sel (SELECT) key repeatedly until Numeric is shown.
4. Use Up or Dwn key to highlight the more .. option (one line below). Press
the Sel (SELECT) key to enter the Numeric menu page.
5. Make the appropriate changes.
Note:
For details about the available parameters please refer to the accor-
ding topics in Chapter E 5.2.7.2: more .. for Primary Function: Numeric
(Numeric menu).
6. When done, press Quit to enter the Save Preset screen.
Fig. E 4-21: The Numeric menu display with Numeric parameters
See Chapter E 5.2.7.2
E 4 Display Modes • E 4.9. Numeric