RTW DigitalMonitor 10500X-PLUS, Operating Manual

Page: 199 / 251

RTW DigitalMonitor 10500X-PLUS 199
E 5.2.3.1 Routing, Label, Color
After pressing Sel on the Routing,Label,Color option of the PPM-Digital
menu, the following submenu is displayed:
This menu features several options to route both input channels of the
DigitalMonitor 10500X-PLUS to the individual bargraphs, to switch bargraphs
on or off, to label bargraphs and to configure individual colors for each
display element of the PPM instrument.
Routing Matrix
Use the matrix to route each physical input channel to one or more internal
instrument channel(s)/bargraph(s). Each line of the matrix represents one
of the input channels 1a and 1b. Use the
Up or Dwn key to highlight one of
the input channels and press the Rgt key to move the cursor to the right
until it marks the desired bargraph position on which the input signal of that
channel should be displayed.
You can press the
Sel key repeatedly to select a different label for this bar-
graph. All labels defined in the Label option below are accessible in this
way.
PPM-State Enables and disables every channel bargraph. Use Rgt
key to select channel and Sel key to switch it on or off.
Label Shows the labels above each bargraph of the PPM. The
labels of the Stereo modes are fixed and cannot be
changed.
Fig. E 5-5: The Routing, Label, Color submenu in PPM mode
on Modify Preset menu (Fig. E 5.2):
©
( Up ), Dwn to more ..,
©
Sel to open PPM-Digital menu
©
( Up ), Dwn to Routing, Label, Color
©
Sel to open the menu
E 5 Menu • E 5.2 Modify Preset