RTW DigitalMonitor 10500X-PLUS
152
A small
green spot
(see Fig. E 3-1) at the right edge of the display shows
whether Mode 1 or Mode 2 is currently selected. To switch to the other mode
simply press the
MODE/SET
button not marked. The preset defined for
this mode will be loaded.
Toggle function
Besides using Mode 1 and Mode 2 there is a second option for easy switching
between different display modes. Repeatedly pressing the same
MODE/SET
button cycles the Multi Instrument 1 through all display modes defined in the
preset used for this mode. Please refer to Chapter E 3.8 for details about
how to define the display modes accessible through this toggle function for
each preset.
Note:
The toggle function is only available if display modes are defined for toggle
mode in the loaded preset. To keep it simple for first-time users the factory
presets do not contain such toggle definitions - so repeatedly pressing
the same
MODE/SET
buttons will have no effect as long as a factory
preset (F1 - F8) is loaded.
Note:
Pressing the buttons
MODE 1/SET
or
MODE 2/SET
for longer than a
second will call up the menu (refer to Chapter E 3.3 for details).
Instrument functions and button/key captions
Some of the buttons on the DigitalMonitor 10500X-PLUS have varying func-
tions depending on the display mode. These functions can be used to modify
certain parameters of the instruments, for example the gain switching of the
PPMs (see Fig. E 3-1). You can control the current instrument for which the
buttons shall be used by simply pressing the red
SELECT
button repea-
tedly. A white frame (see Fig. E 3-1) will mark the instrument (
Program
Meter
,
Multi Instrument 1
or
Multi Instrument 2
) currently selected.
Captions showing the current functions of the buttons can be inserted as a
framed column at the right edge of the display. In this case the bargraph
frame will narrow to free space for the captions (see Fig. E 3-1). A menu
parameter (
General
menu, Show Keys option) defines how the captions
should show up: permanently (On), never (Off) or temporary (Temporary). If
Temporary is chosen the captions will show up for some seconds after
pressing any button. If you want to show the button functions for the currently
selected instrument you can press and hold the
SELECT
button.
See Chapter E 3.3
See Chapter E 3.8
See Fig. E 3-1
See Fig. E 3-1
See Fig. E 3-1
See Fig. E 3-1
E 3 Quick Start E 3.2 Switching display modes with MODE 1
and MODE 2
Summary of Contents for DigitalMonitor 10500X-PLUS
