28 Initial Setup and Configuration
Universal Beltpack
Factory Reset
The
Factory Reset
menu is used to reset the beltpack to its original, factory settings.
Available options are
Yes
or
No
.
The default for this menu is
Off
.
To
perform a factory reset on the beltpack
, do the following:
1.
While in the program menu, navigate to
Factory Reset
.
[voice prompt] “Factory Reset”.
2.
Press the
TALK button
.
[voice prompt] “No”.
OR
Press the
TALK button
again.
[voice prompt] “Yes”.
3.
Press the
CALL
and
TALK buttons
simultaneously
.
The CALL and TALK indicators blink once and then turn off
.
[voice prompt] “Exit”
The LED indicators blinks the number of times associated with the mode it is in (see “Setup Mode
Indication” on page 19). The beltpack is reset to factory defaults.
Summary of Contents for BP-4000
