RTS BP-4000, Technical Manual

Page: 24 / 36

24 Initial Setup and Configuration Universal Beltpack
Mic Gain Menu
The Mic Gain menu is used to set the mic gain for the beltpack. Mic gain adjusts the audio level being
sent out on the line.
Available options for this menu are 1, 2, 3, 4, and 5 .
1 represents the lowest gain setting, while 5 represents the highest gain setting.
The default for this menu is 4 .
A mic gain setting of 4 sets the output to 0dBu, given a -45dBu nominal input on a dynamic microphone.
To configure the mic gain , do the following:
1.
While in the program menu, navigate to Mic Gain .
[voice prompt] “Mic Gain”.
2.
Press the TALK button to navigate to the desired gain level.
[voice prompt] “<gain level X>”.
3.
Exit the Program Menu (see “Exit Program Menu” on page 20).
Sidetone Adjust Menu
The Sidetone Adjust menu is used to set the amount of sidetone heard through the headphones. Sidetone
is the effect of sound picked up by the microphone and then sent to the same headset.
Available options for this menu are 1, 2, 3, 4, and 5 .
1 represents the lowest sidetone level, while 5 represents the loudest sidetone level.
The default for this menu is 1 .
To configure the sidetone adjust , do the following:
1.
While in the program menu, navigate to Sidetone Adjust .
[voice prompt] “Sidetone Adjust”.
2.
Press the TALK button to navigate to the desired sidetone level.
[voice prompt] “<sidetone level X>”.
3.
Exit the Program Menu (see “Exit Program Menu” on page 20).