RTS BP-4000, Technical Manual

Page: 25 / 36

Universal Beltpack Initial Setup and Configuration 25
Incoming Call Beep Menu
The Incoming Call Beep menu is used to enable and disable whether a beep is heard in the headset when
a call comes into the beltpack.
Available options are On or Off .
The default for this menu is Off .
To configure incoming call beep , do the following:
1.
While in the program menu, navigate to Incoming Call Beep .
[voice prompt] “Incoming Call Beep”.
2.
Press the TALK button to enable Incoming Call Beep.
[voice prompt] “On”.
OR
Press the
TALK button to disable Incoming Call Beep.
[voice prompt] “Off”.
3.
Exit the Program Menu (see “Exit Program Menu” on page 20).
Channel Lock Menu (RTS Mode Only)
The Channel Lock menu is used to program whether the BP-5000 has access to one or two channels. It is
also used as a method to switch channels on BP-4000
Available options are Channel 1, Channel 2 or Off .
The default for the BP-5000 is Off .
The default for the BP-4000 is Channel 1 .
To configure channel lock , do the following:
1.
While in the program menu, navigate to Channel Lock .
[voice prompt] “Channel Lock”.
2.
Press the TALK button to select Channel 1.
[voice prompt] “Channel 1”.
OR
Press the
TALK button twice to select Channel 2.
[voice prompt] “Channel 2”.
OR
Press the
TALK button three times to select Reset.
[voice prompt] “Off”.
3.
Exit the Program Menu (see “Exit Program Menu” on page 20).