22 Initial Setup and Configuration
Universal Beltpack
Mode Menu
The
Mode
menu is used to select the configuration of the beltpack.
IMPORTANT:
The first time the TALK button is pressed for a specific menu function, the UBP
voice prompt repeats the current setting of the unit. This allows the user to hear the
current setting of the menu option without changing the setting.
Available menu options are:
RTS (d)
Audiocom
Clear-Com
To
select the Mode
, do the following:
1.
While in the program menu, navigate to
Mode
.
[voice prompt] “Mode”.
2.
Press the
TALK button
.
[voice prompt] “RTS”.
OR
Press the
TALK button again.
[voice prompt] “Audiocom”.
OR
Press the
TALK button again
.
[voice prompt] “Clear-Com”.
3.
Exit the
Program Menu
(see “Exit Program Menu” on page 20).
The LEDs flash to indicate the mode the beltpack is programmed. See “Setup Mode Indication”
on page 19.
Summary of Contents for BP-4000
