P a g e 31
♦
The effect can run the light sequence multiple times (up to 100) and you can specify the
number of repetitions using the controls located on the left of the zoom buttons. You can
use the arrow buttons to increase/decrease the number or you can type it directly. Keep
in mind that only the light sequence will be repeated, the sound will play a single time!
♦
On the Power LED box you can select which channel you’re editing with a single left click
on any line of the graph. The selected channel is drawn with a thicker line.
♦
When you right click inside a light editing box (not on a point), you’ll find two options:
Adds a point at the cursor location. For the Power LED, the point will
be added on the selected light sequence.
Adds a point at the location specified by time and intensity values.
For the Power LED, the point will be added on all 4 channels.
♦
The dotted line means “light sequence has ended on this channel”. Each channel runs
its light sequence independently of the others, so once a channel has ended its light
sequence it will become available to play the next effect or to repeat the current effect if
it is set to play more than one time. Keeping in mind that, in most cases you will want to
end all channels at the same time to avoid de-synchronizing the effect.
Green is
selected
Blue ends here.
At 0.25 seconds, blue will start to
play the next effect or to repeat
the current one if repetition is set.
Red and Green
end here.
