P a g e 18
1. Select slot
The Diamond Controller can store up to 16
fonts in the internal memory, so there are
16 slots to choose from.
If you select a slot that is already used by
a font, it will be overwritten.
2. Select preset
You can choose any of the 9 font presets
which come as default on any Diamond
Controller. The preset that you select at
this step determines the sounds that your
saber will play with this font.
3. Select colors
The color of each effect can be customized using the
diamond-shaped control of the express font wizard. Each face
of the diamond corresponds to an effect, with the main blade
color in the middle.
A few more details about color customization on the next page…
4. Write
Press “Finish”. You will see an overview of the font that
was created based on your options.
Press “Write Effects”. This will write the new font on the
board.
