7
Connections
Connecting to the Power Supply
Plug the main lead (marked AC Cord on the rear of the player) into an appropriate socket
Press the Power Switch ON in the rear panel of the Player to make Standby Mode.
Press the Power button on the Front panel or Remote Control to switch the NEO K-2 Player on.
The present product can be used under the AC 100~240V~. 50/60Hz
<NOTE>
Before plugging your player into a main socket, you must check the voltage.
Connecting the NEO K-2 with TV/Monitor and Amplifier/Receiver
Connection 1 Connection 2
Method 1:
You can connect each
“PLAYER-A/ PLAYER-B”
drive individually using 5.1CH/2CH/Coaxial/Optical
sound outputs and Composite/Component/S-Video/Scart/VGA Video outputs like above “
Connection 1
”.
Method 2:
You can use both
“PLAYER-A”
and
“PLAYER-B”
drive with
One Amplifier/Receiver
and TV/Monitor
via switched A/V OUTPUT
like above “
Connection 2
”.
Method 3:
You can use both
“Connection 1”
and
“Connection 2”
simultaneously.
E.g) “Connection 1” for Karaoke DJ and “Connection 2” for Singer.
