16
System Setup
Video Setup
BRIGHTNESS:
Set the brightness of the video from range 0-12.
CONTRAST:
Set the contrast of the video from range 0-12
HUE:
Set the hue of the video. +color to increase red color, -color to increase green color.
SATURATION:
Set the degree of the saturation of the video.
Speaker Setup
DOWNMIX:
Switch the audio output from LT/RT Mono, STEREO, VSS and 5.1CH mode. In LT/RT Mono Mode, two
sound tracks will be mixed and the difference between these two tracks will be enhanced. In VSS mode,
two sound tracks will be mixed and the difference between these two tracks will be decrease.
SUB
WOOFER:
You can turn ON the sub woofer in 5.1CH mode.
CENTER
DELAY:
You can adjust the center speaker delay upto 0-5MS according to the position of your center speaker.
REAR
DELAY:
You can adjust the rear speaker delay upto 0-15MS according to the position of your rear speaker.
FONT:
Change the font to LARGE or SMALL.
Digital Setup
OP MODE:
To set the Dolby digital output, you can switch between Line Out(encode signal) and RF REMOD(raw
signal)
DYNAMIC
RANGE:
To set the scale of dynamic range in Dolby digital logic sound effect.
DUAL
MONO:
In Dolby sound effect, to set the Dual Mono modes from STEREO, MONO L, MONO R and MIX
MONO.
STEREO:
The proper channels output through both right and left speakers.
MONO L
: the left side channel output through both right and left speakers
MONO R:
the right side channel output through both right and left speakers.
MIX-MONO:
the mixed two channel output through both right and left speakers.
