2
Precautions
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player.
Install your player horizontally, on a suitable base(furniture), with enough space around it for ventilation(7.5~10cm).
Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on
amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is
designed for continuous use. Switching off the Player to the stand-by mode does not disconnect the electrical supply. In order
to disconnect the player completely from the power supply, remove the main plug from the wall outlet, especially when left
unused for a long period of time.
During thunderstorms, disconnect AC main plug from the wall outlet.
Voltage peaks due to lighting could damage the unit.
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
Protect the player from moisture(e.g. vases), and excess heat(e.g. fire place) or equipment creating strong magnetic or electric
fields(e.g. speakers…). Disconnect the power cable from the AC supply if the player malfunctions. Your player is not intended
for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc have been stored in cold temperatures.
If transporting the player during the winter, wait approximately 2 hours until the unit has reached room temperature before
using.
The battery used with this product contain chemicals that are harmful to the environment.
Do not dispose of batteries in the general household trash.
Handling discs
Do not touch the playback side of the disc.
Hold the disc the edges so that fingerprints will not get on the surface.
Do not stick paper or tape on the disc.
Do not fall or impact the disc
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct
sunlight, as there may be a considerable temperature increase inside the car.
Cleaning discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion.
Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
Do not use strong solvents such as alcohol, benzene, thinner, commercially available
cleaners, or anti-static spray intended for older vinyl records.
Handling the Unit
When setting up the unit, the picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case,
position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.
Cleaning the unit
To clean the cabinet, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild
detergent solution. Do not use strong solvents such as alcohol, benzene, or thinner, as these might damage the surface of the
unit.
