To hoist the mainsail:
a)
Unroll the mainsail.
b)
Take the end of the main halyard that emerges from the top of the mast, and tie it to the head
of the mainsail, using a
knot #1
.
Put the top of the main sail into the opening in the mast
track, just above the gooseneck mast collar.
c)
d)
e)
Holding the main sail in line with the mast, pull on the
end of the main halyard that emerges from the bottom of
the mast.
Pull the main sail up to the top of the mast. You will need
to keep the sail in line with the mast to make pulling it up
easier, especially when passing the batten pockets.
If you are hoisting full sail ensure that the luff reefing
slug, used for and adjacent to the reef point, stays
OUT of the mast track.
5.4 - Hoisting the Mainsail
Tidy the main halyard and stow it in the halyard bag
next to the mast, or if you have a spinnaker chute, in the
Velcro pocket under the chute sock at the aft end.
Summary of Contents for Venture S
