2. Preparation
Your RS Venture comes complete with all the components necessary to take the boat
sailing. In order to commission it, you will need the following tools:
•
Pliers or a shackle key
•
Small, flat-bladed screw driver
•
PVC electrician’s tape
•
Small Phillips screwdriver
•
Blade
•
Lighter to seal ropes
Whilst your RS Venture has been carefully prepared, it is important that new
owners should check that shackles and knots are tight. This is especially
important when the boat is new, as travelling can loosen seemingly tight fittings
and knots. It is also important to check such items prior to sailing regularly.
2 - Preparation
2.1 - Hardware pack
Tiller extension
1
Boom
1
Jib
1
Owner’s manual
1
Mainsail
1
Mast and rigging
1
Toestraps
4
Rudder blade
1
Rudder stock
1
Shroud covers
2
Summary of Contents for Venture S
