RS SAILING Venture S, Rigging Manual

Page: 43 / 70

7.1 - Fitting the Rudder
d)
e)
f)
Tie the rudder downhaul block onto the end of the
rudder downhaul with knot #1 .
Tie one end of the rudder downhaul line onto the p clip on the quick release cleat (on the
port side of the tiller).
pass the other end through the block which you added in step d and back through the
quick release cleat.
Failure to correctly locate the rudderstock under the rudder retainer
may allow the rudder to become detached from the boat whilst in use.
Fit the rudder to the boat.
Tie a knot #3 in the tail.
Push retaining clip
to release rudder.