RS SAILING RSCAT 14, Rigging Manual

Page: 40 / 65

38
Use rope loop B.
Pass the loop through one of the middle
cringles in the spinnaker chute, under the
tack bar, back through the hoop and over
the plastic bobble as shown. (It will be much
tighter than shown here).
Repeat on the other side.
Use rope loop A.
Pass the loop through the tack bar
from the rear.
Pass the rope through the upper
cringle in the side of the spinnaker
chute.
Pass the rope loop over the top of the
plastic bobble.
Repeat on the other side.
Use rope C.
Form a loop in one end.
Pass this loop through one of the
lower cringles on the spinnaker chute.
k)
l)
m)
4.4 - Assembly - Spinnaker System