RS SAILING RSCAT 14, Rigging Manual

Page: 33 / 65

31
Locate the low friction ring, jib
clew tie and plastic bobble in the
Cat 14 S pack.
u)
v)
w)
x)
4.3 - Assembly - Sails
Take one end of the jib clew tie and
loop it through the ring as shown,
then add the plastic bobble on the
end and tie a stopper knot.
Tie one end of the jib sheet to the becket on top of
the port Jib sheet block with knot #2 .
Take a loop of the clew tie and pass it through the
webbing loop on the clew of the sail and over the
plastic bobble.
t)
Pull on jib halyard tension then cleat it on the horn cleat
on the side of the mast.