RS SAILING RSCAT 14, Rigging Manual

Page: 12 / 65

10
Insert one of the 8mm battens into the pocket on the tramp.
This will be quite tight.
1330mm
1500mm
1860mm
8mm battens
6mm battens
There are four battens for the tramp.
Insert the 6mm x 1500mm batten through the
end of the beam into the track, making sure
it goes inside the slot on the tramp. You may
need to use one of the 8mm battens to push it
through.
MAKE SURE THE BATTEN IS FULLY INSERTED
THROUGH THE TRAMP POCKET.
MAKE SURE BATTEN GOES THROUGH THE DOUBLE REINFORECMENT.
f)
g)
MAKE SURE THE VELCRO
SIDE IS UPPERMOST.
4.1 - Assembly - Hulls