RS SAILING RSCAT 14, Rigging Manual

Page: 32 / 65

30
r)
s)
CAT 14 S SPEC ONLY
CAT 14 S SPEC ONLY
Tie the jib halyard to the cringle at the top of the jib.
Attach the hanks onto the forestay and hoist jib by
pulling on halyard.
4.3 - Assembly - Sails
• Locate jib tack line and plastic bobble.
• Loop the tack line twice through the
metal ring (which forestay is attached to
- not shown here), add the plastic bobble
and tie knot #4 in the ends.
• Take a loop of the tack line and pass it through the
cringle in the jib tack and over the plastic bobble.