![background image](http://html1.mh-extra.com/html/royal/rc40/rc40_manual_1494058018.webp)
18
MANUAL WEIGHT INPUT
MANUAL WEIGHT ENTRY:
If you do not have the actual parcel in hand to weigh on the scale, a weight can be manually entered in the scale
through the front panel in order to determine a shipping rate.
1) Press the
shipper
key while the scale shows zero.
“INPUT WEIGHT” and “____lb___._oz” will appear on the scale display.
2) Manually enter the weight of the parcel in pounds and ounces for which you are obtaining the shipping rate. Enter
pounds first and then whole ounces, followed by any tenth of an ounce weight. All five digits (two digits for
pounds, two digits for ounces and one digit for tenth of an ounce) must be entered. If there is no value, then enter
a zero. For example, if the weight you intend to enter is 4½ ounces, press
shipper
, then press
zero
,
zero
,
zero
,
four
,
five
and
enter
.
IMPORTANT NOTE:
A maximum of 16.0-ounces may be entered in the ounces section. Since 16.0-ounces equals 1-
pound, any weight amount in ounces-only over 16-ounces should be converted and entered as
pounds and ounces, for example, 32-ounces should be entered as 2-pounds and 0.0-ounces, or 59.7-
ounces should be entered as 3-pounds and 11.7-ounces.
•
To change a number already entered, press the
up
arrow key, which acts as a backspace key.
3) When finished entering the weight, press the
enter
key.
EXIT THE INPUT MODE OR CLEAR A MANUALLY ENTERED WEIGHT:
•
Press
clear
to exit the “manual weight input” mode, if the
enter
key has not been pressed yet.
If the enter key has already been pressed, and the weight and the “hold” icon appear on the display, then press the
hold
key to clear the manually entered weight.