![background image](http://html.mh-extra.com/html/royal/135dx/135dx_instruction-manual_1493971006.webp)
2
SPECIFICATIONS AND SAFETY
__________________________________________________________________
MODEL:
Royal
135dx
Electronic Cash Register
DISPLAY:
Two LCD Displays. Front display for cashier and rear display for customer. Symbols for
error, change, subtotal, minus, total and item count.
CAPACITY:
Total: 9-digit display with 7 numeric-digits input and readout.
PRINTER:
Impact, numeric only serial printer.
INK SOURCE:
Black or Purple Ink Roll, Model IR-40 (ROYAL brand part # 013109)
PAPER SUPPLY:
57MM (2 1/4") Single-Ply, Bond Register Tape (ROYAL brand part # 013129)
MEMORY PROTECTION:
Approximately 30 days after power interruption
3 Size AA (1.5-Volt) Batteries (User installed. Included with unit.)
TECHNOLOGY:
CMOS
RAM
OPERATING TEMPERATURE:
0-40 Degrees Centigrade (32-104 Degrees Fahrenheit)
DIMENSIONS:
14 1/4" D x 13 1/2" W x 9 1/4" H
WEIGHT:
12
lbs.
WARNING
FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIO FREQUENCY INTERFERENCE
STATEMENT INFORMATION TO THE USER
CAUTION: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. If applicable, connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio / TV technician for assistance.
Connection of peripherals to this unit requires the use of grounded, shielded cables to ensure compliance
with the Class B FCC limits.