![background image](http://html.mh-extra.com/html/royal/135dx/135dx_instruction-manual_1493971025.webp)
21
TAX RATE
(Continued)
__________________________________________________________________
TO PROGRAM A FIXED TAX RATE:
(Recommended For Most Applications)
"PRG" mode + Tax 1 - 4 + [Tax Shift] + Tax Rate (4 Digit #) + (amt Tend/TOTAL)
Note: You can program 1 Tax Rate or up to 4 Tax Rates. Remember, when you determine a department's tax status, at that
point, you identify the tax rate you want for that department.
If you make a mistake between steps 2 and 4, press the Clear
[C]
key and start again at step 2.
1.
Enter the program mode: Move the Control Switch to the "PRG" position.
2. Enter
(1 - 4)
, 1 through 4 being the Tax Rate identifier where that tax percentage will be stored in memory.
3. Press
[tax shift]
key
4. Enter
the
Tax Percentage Rate
as a 4-digit number. You MUST enter the rate with three digit decimal places, for
example, if your tax rate is 8%, type
[8000]
; if your tax rate is 7.5%, type
[7500]
; if your tax rate is 9.125%, type
[9125]
. If your tax rate is over 9.999%, then enter it as a 5-digit number, for example 10.5% should be entered as
[10500]
and 11% would be entered as
[11000]
.
5. Press
the
[amt tend/TOTAL]
key.
Note: If you want to set up another Tax Rate, return to step 2.
Continue with other programming or move the Control Switch out of the Program mode.
Example: Set a tax rate of 5.5% in Tax Rate # 1 and then 8.25% in Tax Rate # 2:
[1] + [tax shift] + [5500] + [amt tend/TOTAL] key
[2] + [tax shift] + [8250] + [amt tend/TOTAL] key