![background image](http://html.mh-extra.com/html/royal/135dx/135dx_instruction-manual_1493971023.webp)
19
DEPARTMENT PROGRAMMING
(Continued)
__________________________________________________________________
ZERO PRICE ENTRY SETTING
This procedure allows a price of zero ($0.00) to be entered for a department or PLU price during set-up programming. The
default setting does not accept a "0" price.
1.
Enter the Program mode: Move the Control Switch to the "PRG" position.
2.
To allow zero price entry, type
[8]
, then
[1]
, followed by the
[R/A]
key.
3.
To prohibit zero price entry, type
[8]
, then
[0]
, followed by the
[R/A]
key.
Please note this is the default setting
.
TO PROGRAM DEPARTMENTS AS TAXABLE
1.
Enter the program mode. Move the Control Switch to the "PRG" position.
2.
Select Multiple Sale or Single Item Sale: Type
[0]
or
[1]
0 = Multiple Item Sales
1 = Single Item
3.
Type
[2-digit #]
from the Tax Rate Chart above.
4.
Press
the
[check]
key.
5.
Enter the Pre-set Price using the
[number keys]
, be sure to include the cents (for example, for a $3 pre-set priced
item you must enter 300). If you do not wish to program a department pre-set price, enter "0".
6.
Press the appropriate
[DEPARTMENT]
key.
Repeat these steps for each department you will be using.
Example: Program Department 1 as multiple item sales, taxable using Tax Rate 1, and with a pre-set price of $1.99
Example: [0] + [01] + [check] + [199] + [Department 1]
TO PROGRAM DEPARTMENTS AS NON-TAXABLE
1.
Enter the program mode. Move the Control Switch to the "PRG" position. If a security code has been assigned,
enter the security code and press the
[charge]
key. If no security code has been assigned, continue with Step #2.
2.
Type
[0]
for Multiple Item Sale, then type
[00]
for no tax. Press the
[check]
key.
3.
Press
[0]
for no pre-set price, then press the
[DEPARTMENT 2]
key.
Example: Program Department 2 as multiple item sales, non-taxable, and with no pre-set price (a zero price):
Example: [0] + [00] + [check] + [0] + [Department 2]