background image

42 

TAX SYSTEM PRESET

 

__________________________________________________________________ 

 
In addition to the USA tax mode of ADD-ON TAX which is the standard factory setting for this register, two other tax systems are 
available as follows: 
 
1.

 

Canadian Tax System

 - Special tax programming for the taxation system in Canada. 

 
2.

 

VAT (Value Added Tax)

 - which means that the tax amount is included in the price of the item.  This tax system is most 

commonly used in Mexico and European countries. 

 
The tax system is set as follows: 
 

 

 

Tax System Number

 
Factory Default   =  0 

Add-on Tax: USA Tax Mode - Standard Setting for U.S. tax 

 

 

 

Canadian Tax Mode 

 

 

 

VAT Tax Mode - Commonly used in Mexico and European Countries  

 
To Set the Tax System of the cash register: 

 

"PRG" + [3] + [Tax System Number] + [R/A]

 

                                                                                    

1 digit #

 

 
1. 

Enter the Program Mode:  Move the Control Switch to the "PRG"

 

position. 

 
2. Type 

[3]

, then type the setting number for the tax system desired: 

0 = USA Tax; 1 = Canadian Tax; 2 = VAT Tax. 

 
3. Press 

the 

[R/A]

 key. 

 
For USA tax programming, please see Page 21.  For VAT tax programming, please see Page 43.  For Canadian tax, see Page 
44. 
 

 

Tax Status Number 

 

Condition 

 

 

 00  Non-Taxable 
 

01 

Taxable by Tax 1 

 

02 

Taxable by Tax 2 

 

03 

Taxable by Tax 3 

 

04 

Taxable by Tax 4 

 

05 

Taxable by Tax 1 and Tax 2 

 

06 

Taxable by Tax 1 and Tax 3 

 

07 

Taxable by Tax 1 and Tax 4 

 

08 

Taxable by Tax 2 and Tax 3 

 

09 

Taxable by Tax 2 and Tax 4 

 

10 

Taxable by Tax 3 and Tax 4 

 

11 

Taxable by Tax 1, Tax 2 and Tax 3 

 

12 

Taxable by Tax 1, Tax 2 and Tax 4 

 

13 

Taxable by Tax 1, Tax 3 and Tax 4 

 

14 

Taxable by Tax 2, Tax 3 and Tax 4 

 

15 

Taxable by Tax 1, Tax 2, Tax 3 and Tax 4 

 
 
 
 

Summary of Contents for 135dx




















































Reviews: