Rover DEFENDER 300Tdi, Workshop Manual

Page: 61 / 450

12
ENGINE
4 REPAIR
14. Disconnect engine harness multi-plug.
15. Remove single bolt securing transmission
breather pipe clip to cylinder head and move
breather pipes aside.
16. Disconnect multi-plug and vacuum pipe from
EGR valve, if fitted.
17. Remove starter motor cover and disconnect
battery and fuse box leads.
18. Remove 3 retaining nuts and disconnect exhaust
down pipe.
19. Disconnect inlet and outlet hoses from power
steering pump.
20. Disconnect bleed hose from thermostat housing.
21. Release bleed hose from retaining clips on front
timing cover plate.
22. Remove split pin securing inner throttle cable to
injector pump lever.
23. Depress tags on outer cable adjusting nut,
remove cable from mounting bracket and move
aside.
24. If fitted, release hand throttle cable from
mounting bracket and injector pump lever and
move aside.
25. Disconnect feed pipe and spill return pipe from
injector pump.