Rover DEFENDER 300Tdi, Workshop Manual

Page: 443 / 450

ELECTRICAL
23 REPAIR
HEADLAMP LEVELLING SWITCH
Service repair no - 86.65.16
Remove
1. Remove 2 screws and withdraw switch panel
from lower fascia.
2. Disconnect multi-plug from rear of headlamp
levelling switch.
3. Remove knob from switch spindle.
4. Unscrew retaining nut and withdraw switch from
switch panel.
Refit
5. Fit switch into switch panel and secure with
retaining nut.
6. Fit switch knob.
7. Connect switch multi-plug.
8. Fit switch panel.
HEADLAMP LEVELLING UNIT
Service repair no - 86.41.16
Remove
1. Remove headlamp See Headlamp.
2. Disconnect headlamp levelling unit harness
plug.
3. Rotate levelling unit anti-clockwise to release
retaining lugs from mounting bracket on
headlamp body.
4. Release levelling unit spindle from retaining slot
on headlamp bezel and withdraw unit from
mounting bracket.
Refit
5. Fit levelling unit into mounting bracket and locate
unit spindle into slot in headlamp bezel.
6. Press in unit and rotate clockwise to engage
retaining lugs behind mounting bracket.
7. Connect levelling unit harness plug.
8. Fit headlamp
See Headlamp.