Rover DEFENDER 300Tdi, Workshop Manual

Page: 137 / 450

MANIFOLD AND EXHAUST SYSTEM
5 REPAIR
TAILPIPE - 90
Service repair no - 30.10.22
Remove
1. Raise vehicle on ramp.
2. Remove 2 flange nuts securing tail pipe to
intermediate pipe, see J6243.
3. Release tail pipe from inboard mounting rubber.
4. Release tail pipe from outboard mounting rubber
and remove.
Refit
5. Fit tail pipe to intermediate pipe.
6. Secure tail pipe to mounting rubbers.
7. Secure tail pipe to intermediate pipe. Tighten
nuts to 30 Nm (22 lbf/ft).
8. Lower vehicle.
TAILPIPE - 110/130
Service repair no - 30.10.22
Remove
1. Raise vehicle on ramp.
2. Remove 2 flange nuts securing tail pipe to
intermediate pipe, see J6244.
3. Release tail pipe from front mounting rubber.
4. Release tail pipe from rear mounting rubber.
5. Release tail pipe from intermediate pipe and
feed over rear axle.
6. Remove tail pipe.
Refit
7. Feed tail pipe over rear axle and connect to
intermediate pipe.
8. Secure tail pipe to mounting rubbers.
9. Secure tail pipe to intermediate pipe. Tighten
nuts to 30 Nm (22 lbf/ft).
10. Lower vehicle.