Rover DEFENDER 300Tdi, Workshop Manual

Page: 170 / 450

TRANSFER GEARBOX
5 REPAIR
63. Feed transmission brake cable through heel
board. Ensure cable grommet is correctly
located.
NOTE: Apply a soap solution to aid fitment
of cable.
64. Lower vehicle ramp.
65. Connect cable clevis to handbrake lever and fit
handbrake gaiter.
66. Connect high/low lever to operating rod.
67. Fit breather pipe banjo union to high/low
cross-shaft housing.
68. Fit cntre access panel to seat base. If fitted,
secure EGR and alarm system diagnostic
connector mounting bracket to front of access
panel.
69. If fitted, reconnect multi-plug to EGR control unit
on base of centre seat cushion or cubby box.
70. Fit seat cushion or cubby box See CHASSIS
AND BODY, Repair, Cubby box .
71. Reconnect battery.
72. Check operation of handbrake and adjust as
necessary See BRAKES, Repair, Handbrake
cable .