Controls and Features
4
10
Chipper Chute
Allows twigs and small branches up to 2” in diameter to be fed
into the impeller for chipping.
Hopper
Allow leaves and small branches up to 1/2 diameter to be fed into
the impeller for chipping and shredding. Material can be raked
into the hopper by lowering it down to the ground.
Release Rod
The release rod is located on the impeller bracket assembly and it
is used to release or lock the hopper when raising or lowering.
Discharge Chute
Debris exists the machine’s reduction chamber through the
discharge chute.
Engine Controls
See the engine Owner/Operator manual packed with your unit
for the location and function of the controls on the engine.
Chipper Chute
Hopper
Tow Bar†
Model Series 460 Shown
† If Equipped
Release Rod
Summary of Contents for CS454R Series
Page 19: ...Notes 10 19...
