2015-2017 5.0L Mustang Phase 1/2 RHD ROUSHcharger Kit
SECTION A – DISASSEMBLY
1316-RHD-AA 12152016
11
800.59.ROUSH
• Ship the PCM and contents to:
ATTN: PCM FLASH
39555 Schoolcraft Rd.
Plymouth, MI 48170
Upon receipt of the PCM, a customer service
representative will contact you to arrange payment.
Once you receive your ROUSH fl ashed PCM, reverse
step 8 for PCM installation.
If fl ashing the vehicle using RDT, proceed with step 9.
12. Raise the front of the vehicle using the Ford
recommended lifting points and place onto safety
stands. With the tires lifted off of the ground,
remove the front wheels.
13. Note the position of the fourteen (14) small,
medium and large pushpins on the inner wheel
well splash shields so they can be reinstalled in
the same position. Remove the pushpins then
remove the inner wheel well splash shields.
14. Remove the nineteen (19) lower close-out panel
bolts and the two (2) pushpins. Remove the lower
close-out panel from the vehicle (7 mm socket).
15. With the engine cool, remove the cap on the
engine coolant degas bottle and drain the coolant
using the petcock located on the lower passenger
side of the radiator. Save the coolant for reuse.
