Rothenberger Rofrost Turbo, Instructions For Use Manual

Page: 19 / 162

15
Troubleshooting
Basic details can be found in the chapter on safety information.
In addition please also check:
-
that adequate heat-conductive paste is applied for the contact between the refrigerating tongs and
the pipe or the reducing insert and the pipe,
- that the refrigerating tongs are attached to the pipes properly,
- that the water circuit is idle.
Among other things, additional influences can have an effect on the length of freezing time :
-
wall thickness of the pipes,
- pipe material,
- contaminated water,
- outgoing temperature of the water to be frozen,
- ambient temperature (e.g. solar irradiation),
- operating temperature of the equipment,
- bent or stretched refrigerating hoses.
The freezing parameters in the table are only reference values and ROTHENBERGER WERKZEUGE GmbH
does not accept responsibility for the correctness.
Avoid short-term interruptions in power when the equipment is in operation.
The equipment is fitted with an overload device. In the event that this device goes into action, it is necessary
to allow a pause of 5 minutes before switching the equipment back on.
If, after troubleshooting, the equipment is still not completely functional, you should contact
ROTHENBERGER WERKZEUGE GmbH.
Accessories
The relevant accessories and an order form can be found from Page 152 onwards.
Disposal
The heat-conductive paste is eudermic and ecologically friendly and can be recycled or disposed of with
normal waste. Cloths contaminated by the heat-conductive paste can be disposed of with the normal waste
without any concerns.
When disposing of the pipe freezing equipment it should be ensured that the R404a cooling agent is
removed separately and accordingly by a specialised company.
Components of the unit are recyclable material and should be put to recycling. For this purpose registered
and certified recycling companies are available. For an environmentalfriendly disposal of the non-recyclable
parts (e.g. electronic waste) please contact your local waste disposal authority.
ENGLISH