ENGLISH
15
1
Safety Notes
FCC-Statement (Class A, Group 1)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause interference, and 2) this
device must accept any interference received, including interference that may cause
undesired operation.
Federal Communications Commission Statement
NOTE – This equipment has been tested and found to comply with the limits for a Class A ,
Group 1 digital device, pursuant to Part 15 of the FCC Rules. These limit values were designed
to provide adequate protection against faults occurring during operation in industrial areas. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be deter-
mined by tuning the equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/television technicians for help.
Class A, Group 1 Note
Warning
– This is a Class A, Group 1 product. In a domestic environment this product may
cause radio interference in which case the user may be required to take adequate measures.
1.1
Intended use
ROCAM mini HD:
The ROCAM mini HD TV inspection system is solely for inspecting empty, clean pipes, hollow
cavities and hollow spaces, as indicated under Technical data. Other uses are discouraged.
Do not leave camera heads in the sun for extended periods. This can damage the camera mod-
ule! All applicable standards and regulations must be observed.
This tool is only suitable for indoor use. Never expose tool to rain!
Among others, these particularly include:
- Laws on technical equipment (Equipment Safety Act) and associated regulations
- Low Voltage Directive
- UVV VBG 1 „General regulations“
- UVV VBG 4 „Electrical systems and equipment“
- Guidelines for work in containers and confined spaces (BG rule 77), Guideline for work-
stations.
Use only original ROTHENBERGER or CAS (Cordless Alliance System) battery packs and ac-
cessories.
Charger and battery:
The chargers are only suitable for charging ROTHENBERGER and CAS (Cordless Alliance Sys-
tem) battery packs.
This tool is not designed for use by persons with physical, sensory or mental disabilities, or with
insufficient experience and/or knowledge, unless they are supervised by a person responsible
for their safety, or have received instructions on how to use the tool by this person.
Never attempt to charge batteries that are not rechargeable. Danger of explosion!
Battery packs marked with CAS are 100% compatible with CAS devices (Cordless Alliance Sys-
tem). To select the appropriate device, please contact your ROTHENBERGER dealer. Read the
relevant instructions for the devices used.
Summary of Contents for ROCAM mini HD
Page 2: ...Overview A 1 8 5 no 1300006044 basis Module 2 3 4 6 7 10 9 11 12 ...
Page 30: ...NOTES ...
Page 31: ...NOTES ...