MDR-42
Technical Data
ROTEC technology
- 48 -
9.11. BIOS OPERATION
The module is equipped with a Phoenix BIOS, which is located in an onboard Flash EEPROM. The
device has 8-bit access. Faster access (16 bit) is provided by the shadow RAM feature. You can
update the BIOS using a Flash utility.
9.11.1. Setup Guide
The PhoenixBIOS Setup Utility changes system behavior by modifying the BIOS configuration. The
setup program uses a number of menus to make changes and turn features on or off.
The BIOS setup menus documented in this section represent those found in most models of the
ETX-
PM.
The BIOS Setup for specific models can differ slightly.
Note: Selecting incorrect values may cause system boot failure. Load setup-default values to recover by pressing <F9>. It
might also be necessary to use the “reset configuration data” option in the BIOS setup and set it to “yes”. In certain
circumstances this may also help to recover from system boot failure or a resource conflict.
9.11.2. Start Phoenix BIOS Setup Utility
To start the PhoenixBIOS setup utility, press <F2> when the following string appears during bootup.
Press <F2> to enter Setup
The Main Menu then appears.
Summary of Contents for MDR-42
