9
Parking Sensor System
Control unit
The reverse parking system has 1 ECU that should be
installed near the back-up lamp in the trunk.
Warning unit
Install the warning unit using supplied adhesive strip in a
location where the alarm can easily be heard by the driver of
the vehicle.
Powering up
For details, refer to “Powering up” on page 12.
Test
For details, refer to “Test the System” on page 13.
Note: Sensors and trunk harness connectors are serialized
and must be connected in position and order as shown in
Fig.2; otherwise the diagnostic function will reference the
wrong sensor.
Tips on Sensor Installation
Width of different vehicle models varies; it is very
important to choose the correct locations to install sensors.
Sensors need to be
installed with the “Up” mark
facing up as shown in Fig.13.
Sensor must be fully
inserted and fit flush to
bumper face.
Summary of Contents for Park-Pro HD
Page 1: ...Form 5299 Rev B 07 27 12...
