13
Parking Sensor System
Turning on reverse parking system
Once reverse is engaged, system is automatically activated;
when vehicle is shifted out of reverse gear, system stops
working.
Test Methods
Test tools
Conduct tests by using obstacles behind the vehicle.
Prepare a PVC tube of
Ø75mmX1000mm(Ø3”X39”L)
for short distance test. Fig.17.
Prepare a wood plank of
500X500X10mm
(20”X20”X4”)
for
long
distance test:
＞
1.2M (47”)
.
Fig.18.
Tests of rear detection
Turn the vehicle key to “ON” position, don’t start the
vehicle engine.
Put vehicle in reverse gear, move the 2 obstacles forward
and backward 20~200cm(8”-79”) behind vehicle. System
should beep and/or visually show the warning zones,
distance to and direction of the obstacles.
Check the sensors one by one. Refer to Fig.17 & 18.
●
DISCLAIMER
The system is designed and intended as a warning aid for
parking only.
The supplier of this product accepts no responsibility for
any accidents and/or damage caused during the use of this
system.
Detection results may be affected by environmental
conditions: i.e. rain, fog, snow, extreme temperature. Due
to obstacle variability and road condions, warning levels
Summary of Contents for Park-Pro HD
Page 1: ...Form 5299 Rev B 07 27 12...
