12
Parking Sensor System
electrical connectors.
·
Press the metal part tightly to ensure cables are well
connected. See Fig.16.
Power connection steps
：
Securely connect the red power cable of ECU to the +12V
wire of the reverse light;
Securely connect the black ground cable of ECU to a
vehicle ground point.
Precautions
Vehicle engine must be off when installing the system.
The ECU must not be installed near any potential sources
of interference, e.g. exhaust pipe, other cables or groups of
cables.
Detection results may be affected if sensors are installed
in steel bumpers without rubber sleeves.
Ultrasonic and electromagnetic waves from other
sources near the system may affect detection results.
●
TEST THE SYSTEM
Test Subjects
Audible warning
Refer to Fig 3 and 5
Distance, direction and warning zones
Refer to Fig 4 and 5
Summary of Contents for Park-Pro HD
Page 1: ...Form 5299 Rev B 07 27 12...
