12
5.3 System Menu
The options in this section enable you to set up options within SYSTEM SETTING to match your
TV, set the LOCAL TIME, configure and setup timers for timed recordings in TIMER and check
SYSTEM INFORMATION. Press MENU and then VOL+ to enter the SYSTEM Menu,
then use the CH-, CH+ keys to select the item you wish to adjust and the VOL-, VOL+ to select
the new setting.
5.3.1 System Setting
Adjust the SYSTEM SETTINGS to match your TV and other equipment. When finished
configuring the settings, press “OK” to save and exit. You will be prompted to confirm your
new settings prior to exiting.
•
TV type:
Set your desired Resolution selecting
from; 1080i, 720p or 576p. It is advised to
select 1080i for High Definition.
•
Screen Mode:
To set between 16:9 wide screen
and 4:3 TV screen mode, set to Auto as default.
•
Screen Format:
To set the Screen mode format
to Letter Box, Combined, Pan & Scan or Auto format
•
SPDIF Output:
To set SPDIF audio format output to Dolby or PCM
•
Frame Rate:
To choose between; PAL, NTSC or Auto as the output type.
•
Low Power:
Keep switched to ON to save energy.
•
Three Hours Shut Down Reminder:
If set to ON the Recorder will go into STANDBY after
three hours of inactivity.
5.3.2 Local Time Setting
Here you can set the TIME and DATE on your Recorder.
•
GMT Usage:
To activate GMT Time Offset
settings. Set the GMT Time Offset (number of
hours from -12 to 12, default set to ON).
•
Manual Time Setting:
(Default set to OFF)
•
Manual Date / Time Setting:
To edit the time and date settings the MANUAL TIME
SETTING will need to be set to ON.
Local Date (dd/mm/yy): Set the Local Time by inputting numbers 0~9 for hour and minute.
Local Time (hh /mm): Set the Local Time by inputting numbers 0~9 for hour and minute.
NOTE: It is recommended you leave both GMT USAGE and MANUAL TIME SETTING
to the default setting of OFF. In this way your date and time will be set automatically
from received programmes.
