Warning:
The symbol with the word “ Warning ”
within the equipment manual indicates a potentially
hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION:
The symbol with the word “ Caution ”
within the equipment manual indicates a potentially
hazardous situation which, if not avoided, may result
in minor or moderate injury. It may also be used to
alert against unsafe practices.
Warning Hazardous Voltages:
This symbol is
intended to alert the user to the presence of
uninsulated “ dangerous voltage ” within the product
enclosure that may be of sufficient magnitude to
constitute a risk of shock to persons.
ESD Susceptibility:
This symbol is used to alert the
user that an electrical or electronic device or assembly
is susceptible to damage from an ESD event.
Important Safety Instructions
1.
Warning:
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any ventilation openings. Install in
accordance with manufacturer's instructions.
8.
Do not install near heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The third prong is provided for your safety.
If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
10.
Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11.
Only use attachments/accessories specified by the
manufacturer.
12.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
13.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as when the power-supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
14.
Do not expose this apparatus to dripping or
splashing, and ensure that no objects filled with
liquids, such as vases, are placed on the apparatus.
15.
To completely disconnect this apparatus from the
AC Mains, disconnect the power supply cord plug
from the AC receptacle.
16.
The mains plug of the power supply cord shall
remain readily operable.
17.
Warning:
Indoor Use: To reduce the risk of fire
or electric shock, do not expose this apparatus
to rain or moisture.
18.
The safe operation of this product requires that a
protective earth connection be provided. A
grounding conductor in the equipment's supply cord
provides this protective earth. To reduce the risk of
electrical shock to the operator and service
personnel, this ground conductor must be connected
to an earthed ground.
19.
Warning:
This apparatus, when equipped with
multiple power supplies, can generate high
leakage currents. To reduce the risk of electric
shock, ensure that each individual supply cord
is connected to its own separate branch circuit
with an earth connection.
20.
CAUTION:
These service instructions are for
use by qualified service personnel only. To
reduce the risk of electric shock, do not perform
any servicing other than that contained in the
operating instructions unless you are qualified
to do so.
21.
Service barriers within this product are intended to
protect the operator and service personnel from
hazardous voltages. For continued safety, replace
all barriers after servicing.
22.
Certain parts of this equipment still present a safety
hazard with the power switch in the OFF position.
To avoid electrical shock, disconnect all A/C power
cords from the chassis' rear appliance connectors
before servicing.
23.
This product contains safety critical parts, which, if
incorrectly replaced, may present a risk of fire or
electrical shock. Components contained within the
product's power supplies and power supply area are
not intended to be customer-serviced and should be
returned to the factory for repair.
24.
To reduce the risk of fire, replacement fuses must
be the same type and rating.
iv
• Document Information — Acuity Setup Manual (v9.2)
Summary of Contents for Acuity 4410AR-020
Page 1: ...Acuity Setup Manual v9 2...
