Ross ACO-4400A, User Manual, Page: 86 / 112

6–10 • DashBoard Menu System ACO-4400A User Manual (Iss. 03)
Slot 16 - System Setup Interface
The Slot 16 - System Setup interface should only be accessed to verify the network and SNMP
settings for the ACO-4400A.
Example of Slot 16 - System Setup Interface in DashBoard
Status Tab
The Status tab provides read-only information on the auto recover settings, and monitors the
errors encountered on the primary and backup channels. This information is a duplicate of the
fields on the
Slot 0: ACO-4400A interface as outlined in Table 6.2 on page 6-6.
Network Tab
The Network tab includes two sub-tabs: Ethernet and SNMP.
Ethernet Tab
The read-only fields report the network settings assigned to the ACO-4400A. These settings can
only be set via the front panel menu system.
SNMP Tab
The read-only fields provide information when setting up the Simple Network Management
Protocol (SNMP) which is compatible with many third-party monitoring and control tools.
SNMP provides optional support for remote monitoring of your ACO-4400A via the controls
outlined in the Management Information Base (MIB) file for your unit.
Calibration Tabs
The Calibration tabs contain fundamental settings relating to the functionality and accuracy of the
ACO-4400A. These settings are determined during initial testing and through subsequent
configuration and alignment. They should not normally require re-configuration during service. It