Ross ACO-4400A, User Manual, Page: 104 / 112

9–2 • Calibration Procedure ACO-4400A User Manual (Iss. 03)
Overview
The Calibration Menu contains fundamental settings relating to the functionality and accuracy of
the ACO-4400A. These settings are programmed during initial testing and through subsequent
configuration and alignment. It is a good idea to make a manual record of these settings in case
they become corrupted or are inadvertently changed. A convenient way to achieve this is to print
out the table at the end of the System Setup Menu section, and record the stored values. You can
then store this list in a safe place.
Disclaimer
Most of these settings are determined during initial testing and through subsequent configuration
and alignment. They should not normally require re-configuration during service. In some cases,
specific test equipment or even custom apparatus is required to perform calibration and
configuration.
On no account should the user attempt to alter any of these settings without proper authorization
from Ross Video Limited.
If problems are encountered, these settings can only be re-instated by performing the detailed
Calibration Procedure that follows.
Contact Ross Video for further instructions.