Ross ACO-4400A, User Manual, Page: 82 / 112

6–6 • DashBoard Menu System ACO-4400A User Manual (Iss. 03)
“Fixed PSU -Sensor absent”
Because the temperature report includes the current temperatures and both the minimum and
maximum temperatures detected by the installed temperature sensors, this information might be
useful if you are experiencing reliability problems in an extreme environment.
Status Tab
The Status tab provides read-only information on the auto recover settings, and monitors the
errors encountered on the primary and backup channels.
PSU Status Tab
The PSU Status tab enables you to monitor the power supply units in use by the ACO-4400A.
From this tab you can review the following for each PSU: overall status, and the number of hours
in use. Use the Reset buttons to clear the read-only fields and re-start the counts.
Table 6.2 Status Tab Items
Tab Title Item Parameters Description
No. of channels #
Reports the number of configured channels on
the ACO-4400A (as specified in the Slot 1:
Channel Setup interface)
Changeover Mode #
Indicates what the Changeover Mode is set to
in the Slot 1 - Channel Setup > Configuration
tab
On Air
Primary is On Air
Indicates which SRG-4400 is currently active
(on air)
Backup is On Air
Auto Recover
Settings
Recover Mode #
Indicates what the Recover Mode is set to in
the Slot 1 - Channel Setup > Configuration tab
Recover Delay in
Seconds
#
Indicates the number of seconds the
ACO-4400A will wait before performing the
task set in the Recover Mode menu
Recover Delay
HH:MM:SS
#
Recover Delay
Countdown
#
Displays an active timer that reports how long
until the Recover Mode setting takes effect
Primary Error
Channel,
Backup Error
Channel
1st Error
Indicates the last six errors that the specified
SRG-4400 encountered
2nd Error
3rd Error
4th Error
5th Error
6th Error