Ross ACO-4400A, User Manual, Page: 85 / 112

ACO-4400A User Manual (Iss. 03) DashBoard Menu System • 6–9
• select the 'additional' channel types as “No Measurement”, or,
• reduce the
Number of Channels setting to correspond to the actual number of inputs to
monitor, rather than the number of inputs connected.
Table 6.4 Channels Tabs Items
Tab Title Item Parameters Description
Channel #
a
a. The number channels displayed is determined by the No of Channels menu in the Configuration tab.
Signal Type
No Measurement
The status fields on the tab do not report the
status of the channel
Color Black
b
b. No ancillary signals present, i.e. only Sync & Burst.
Specifies the signal type to monitor on the
specified incoming channel
Color Black + VITC
c
c. With one or some ancillary signals present.
600mV TriSync
SD SDI - LOS
HD SDI- LOS
3G SDI- LOS
1V 10MHz
1V Subcarrier
1V AES
2V Pulses- LOS
4V Pulses- LOS
Primary Signal
(read-only)
#
Reports the input signal strength from the
Primary SRG-4400 detected on the specified
channel
Primary Health
(read-only)
Green indicator
No errors are detected on the channel or the
Signal Type is set to No Measurement
Red indicator An invalid signal is detected
Backup Signal
(read-only)
#
Reports the input signal strength from the
Backup SRG-4400 detected on the specified
channel
Backup Health
(read-only)
Green indicator
No errors are detected on the channel or the
Signal Type is set to No Measurement
Red indicator An invalid signal is detected