Service and cleaning
65 / 89
Maintenance work
► Clean the device with a suitable sponge or brush.
Check the products for contamination before use to avoid surface
damage.
► In addition, use a tested car wash detergent to remove road dirt.
Do not use household soap or detergent.
► Rub the device dry with a chamois leather or a suitable cloth.
Check the products for contamination before use to avoid surface
damage.
► Wipe off tar or asphalt spots with a tar cleaner and a soft cloth.
The exterior of the device has been cleaned.
Washing the exterior of the device with a high pressure cleaner
NOTICE
Damage to the components through cleaning with high pressure
cleaner!
Pressurised water from high pressure cleaners can damage components
on the product.
Do not use high-pressure cleaners to clean the product!
Cleaning with a high pressure cleaner is not permitted.
Clean fittings and LCS control panels
Do not use running water for cleaning the fittings and the LCS control
panels.
Splash water can damage electrical components.
Do not use solvents.
► Clean fittings and LCS control panels with damp cloths.
Fittings and LCS control panels have been cleaned.
8.1.2
Maintenance and cleaning of 3M Scotchcal
tm
and Controltac
tm
films
NOTICE
Do not wash devices and vehicles that are freshly glued within the
first 48 hours!
Cleaning agent
Lettering and logos made of Scotchcal and Controltac films can be cleaned
with commercially available cleaning agents for car care, as long as they do
not contain abrasive additives or organic solvents.
Cleaning process
See "Clean device".
Cleaning in car wash facilities
Scotchcal and Controltac films are car wash resistant.
