Rose electronics UltraView, Installation And Operation Manual

Page: 10 / 52

The rear panel
All cables are connected at the UltraView’s rear panel as shown below. The
unit shown below is in the L style chassis but is similar for other models.
Table 2. The rear panel
Panel Label Connector Description
COMPUTER 1-8 DB25 Female
Computers are connected at these connectors using CPU
adapter cables. The cables have a DB25 male at one end and ap-
propriate connectors at the other end, depending upon your
video, keyboard and mouse type. You must have an adapter ca-
ble for each CPU you plan to connect.*
MONITOR/
KEYBOARD/
MOUSE DB25 Female
Keyboard, monitor, and mouse are connected at this connector
using a MKM adapter cable. The cable has a DB25 male at one
end and appropriate connectors at the other end, depending upon
your video, keyboard and mouse type. Only one MKM adapter ca-
ble is needed.*
RS232 RJ-11 Jack
RS232 serial port for connecting a computer or terminal from
which switching commands can be sent to switch CPUs.
UltraView firmware upgrades and diagnostics are also accessed
through this port.
POWER DIN5 Female
Power transformer included in package connects here. This is
not a keyboard input. Power transformers are available for US. or
International use. Both have center tapped output of 17 VAC at
1.4A.
United States: Standard 117 VAC from regular AC power outlet
International: 230 VAC input common outside USA
*
See Appendix E for further cable information.
4
ULTRAVIEW INSTALLATION AND OPERATION MANUAL
MO N I TO R / KE Y B O AR D /M O U S E
R S 2 3 2
P O W E R
1 7 VA C C T
2
6
1
5
4
8
3
M A D E I N U S A
7
7
Figure 2. The UltraView rear panel