Rose electronics UltraView, Installation And Operation Manual

Page: 34 / 52

OPERATION: COMPUTER SELECT WINDOW
You can pop-up a computer select window on top of your computer screen
to select a specific computer from a list of computers. The computer select
window is accessed by pressing and releasing the left control key and then
hitting the Escape key. The window shown in Figure 14 will appear. The
arrow in the column after the computer number points to the currently
selected computer.
The text is overlayed on top of your current video. Use the up and down
arrow keys to select the desired computer. If you have more than 16
computers configured, use the page up and page down keys to access the
other computers at up to 16 computers/window. The window height will vary
in size depending upon the maximum number of computers configured. For
instance if maximum computers is configured to 6, then 6 computer names
will show in the window.
Use the configure overlay page described on page 23 to set the position and
color of the computer select window. When the desired computer is
highlighted, hit enter to immediately switch to that computer or escape the
window to abort switching and remove the computer select window from the
screen.
When switching to the new computer, the name of the new computer will
show in its previously configured position, color, and font.
28
ULTRAVIEW INSTALLATION AND OPERATION MANUAL
Figure 14 Computer select window
Computer select window
1 Computer 1
2 Computer 2
3 Computer 3
4 Computer 4
5 Computer 5
6 Computer 6
7 Computer 7
8 Computer 8
Computer 1