manualshive.com logo in svg

Rose electronics UC1-1X16U/E, Installation And Operation Manual

Share
Download
Rose electronics UC1-1X16U/E Installation And Operation Manual Download Page 73

 

ULTRACONSOLE USERS MANUAL 

67 

 

Appendix G. Password jumper 

If the configuration password is ever forgotten, the UltraConsole switch 
has a special “Password” reset jumper on the CPU card.  This jumper 
is labeled JP31 on all models.  To use this jumper to bypass the 
password, perform the following: 

1. Turn off the UltraConsole switch and remove the top cover. 
2. Install a jumper on JP31 to short the two terminals.  

The login requirement will be bypassed and you will be granted 
access.  This does not delete the password, only bypasses the 
function.   

3. Power on the UltraConsole with the jumper in place. 
4. Call up the main menu; select “System” and press [Enter].  
5. Select “Configure password” from the configure system menu and 

press [Enter].   

6. Enter a new configuration password and press [Enter].   
7. Save the new configuration password from the “Main Menu”.  
8. With the new password saved, turn off the UltraConsole switch. 
9. Remove the jumper on JP31. 

10. Re-install the top cover. 
11. Turn the UltraConsole on.  The UltraConsole switch will boot up 

and the new password will be effective.  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for UC1-1X16U/E

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands