ULTRACONSOLE USERS MANUAL
31
Resolution
(Default: 640x480@60Hz)
Selects the resolution and scan rate of the on-screen display when no
attached computer video is present. If a computer video is shown, the
detected video resolution from the connected computer is used.
To change the resolution select the resolution field and press [Enter].
A list of supported resolutions will display. Select the new resolution
from the list and press [Enter]. The supported resolutions are:
640x480@60Hz
640x480@72Hz
640x480@75Hz
640x480@67Hz
832x624@75Hz
1152x900@66Hz
1152x900@76Hz
Start
(Default: 0)
Assigns the CPU port number the KVM station will connect to on start
up and login. 0 = no connection. To change the value, select it from
the menu and press [Enter]. Type in the CPU port number the selected
KVM station will connect to upon start up or login and press [Enter].
User
(Default: User 1)
This field is used to assign a specific user to the KVM station. To
change the user, select the user field and press [Enter]. A selection
box will display a list of user names followed by “Login”. Select the
user to assign to the selected KVM station and press [Enter]. Use the
page up/down keys to display more users. If “Login” is selected, the
KVM user must login with their user ID and assigned password to gain
access to the KVM station.
The configure user, profile, and group menus all tie together to provide
access control to the computers. A group defines which computers in
the system can and cannot be accessed. This group is assigned to a
profile name. The profile defines how the computers (defined by the
group) can be accessed. The profile is assigned to a user or users.
When a user logs on to a KVM station, their assigned profile is
validated. This profile defines which group has been assigned (which
computers can be accessed), what mode the user can connect to the
computers with (view, share, control, private), the share time, scan
time, and logout time.
